- A Guide to Print Finishes
- Textile Printers - Large Format Direct-to-Fabric Printing & Finishing
- Subscribe to Blog via Email
- Curing during and after printing
- Appalachian State University
- Screen Printing Versus Ink-Jet Printing | Textile World.
- Psychotropic Agents: Part I: Antipsychotics and Antidepressants;
- A short introduction to print - Finishing Techniques by Alex Bucktin - Issuu?
- The Monarchy and the Constitution.
- Understanding Digital Finishing!
- Prophesying Daughters: Black Women Preachers and the Word, 1823-1913.
If the copies are of the same size, the sheets are automatically collated into sets arranged in page order, and are output in alternating directions. Configuring the Machine's Basic Settings. The copies are output with the same orientation, but staggered in alternating layers. For the Collate or Group mode, enable or disable the Offset mode by pressing [Offset]. When the Offset mode is enabled, the key turns black.
A Guide to Print Finishes
If you select [Corner], the display above appears. Select the staple position. If you select [Double], the display below appears. When scanning is complete, press [Done]. Finishing Mode. Inner Finisher-B1. Not attached.
- The Hidden Child?
- Myths: Decode: v. 1 (Decode Books).
- Intellectual Property and Open Source: A Practical Guide to Protecting Code.
- Wild Format Introduction to Finishing - sunreracomp.tk.
- Special Print Finishes;
- Sam Loyds puzzles. A book for children!
If bold characters or centers of lines are missing from printed data, select [Level 1]. If this does not solve the problem, select [Level 2]. If text or diagrams are blurred when printing, this function adjusts printing to improve the result. Try [Mode 1] to [Mode 4] in that order.
Textile Printers - Large Format Direct-to-Fabric Printing & Finishing
The print result may be improved with standard settings by changing the printing environment and paper type. If this is the case, return the setting to standard.
Depending on the environment where the printer is installed, line-shaped stains may appear in the printed output. If this happens, you can adjust the print settings to compensate.
Subscribe to Blog via Email
Try [Mode 1] first. Using the [Special Print Adjustment A] function may result in thinner print density and rough print results. Prints the edges of dark colored text, lines, and diagrams smoothly. Normally, you should print with the [Mode 1] setting. Prints not only the edges, but also the interior halftones of diagrams smoothly.
If the interior halftones of dark colored large text and broad lines exhibit color shift and do not print smoothly with the [Mode 1] setting, try printing with [Mode 2]. Prints dark colored text and lines smoothly on halftone backgrounds. If the interior halftones of dark colored large text and broad lines exhibit color shift, and the edges of light colored text and lines are uneven and do not print smoothly with the [Mode 1] setting, try printing with [Mode 3].
Prints the edges of a variety of objects smoothly. If the edges of light colored large text and broad lines are uneven and do not print smoothly with the [Mode 1] setting, try printing with [Mode 4]. Prints images and halftone objects evenly. If the color bands of images, diagrams, and gradations are uneven, and shading patterns to not print uniformly with the [Mode 1] setting, try printing with [Mode 5]. Prints entire objects smoothly. If there is halftone shift and unevenness throughout images with the [Mode 1] setting, try printing with [Mode 6].
Functions that cannot be used with this function modes 1 to 4 :. If curling occurs, causing paper jams, use this function to alleviate the curling.
Curing during and after printing
If wrinkling occurs, causing paper jams, use this function to alleviate the wrinkling. When [Mode 1] and [Mode 2] are available, try [Mode 1] first. Depending on the printer model, [Mode 1] corrects wrinkles when printing with envelopes, and [Mode 2] when printing with paper whose edges are moist.
Enables you to set whether the printer driver spools print data in EMF metafile format.
Print data is spooled in EMF format. When printing from an application, this shortens the time taken for the application to send the data to the printer.etlinipor.cf
Appalachian State University
When spooling in EMF format, problems such as the printed result differing from the image shown on the monitor, and more time being required for printing than normal, may occur depending on the application being used. Disables the passthrough function of the printer driver. If you cannot print from an application that sends print data directly to the printer, disabling passthrough may make printing possible.
This function reduces the print time when printing the print data contains a mixture of color pages and grayscale black and white pages. When using 2-sided printing to output print data containing an odd number of pages, this function prints the last page in 1-sided print mode to reduce the print time. Corrects lines of less than two dots in width to a thickness of two dots when printing.
Corrects lines and rectangles of less than two dots in width to a thickness of two dots when printing. Corrects lines and rectangles of less than three dots in width to a thickness of three dots when printing. Text quality may deteriorate when printing multiple pages on each sheet N on 1. Also, colors in gradations may be printed differently to those displayed on the monitor. In cases where barcode printing is unsatisfactory, such as when a barcode on a printed article is unreadable, this function adjusts the thickness of the printed lines.
Enables you to set a special print mode for adjusting text and lines so that they print more clearly. This function is useful for printing barcodes, text, and images in documents that have strong contrast. Enables you to specify which side printing starts from when performing 2-sided printing. Use this function if pages are not printed from the intended page source or on the intended page type when performing 2-sided printing. The pages may then be printed correctly.